You will have to remove the four screws which hold the shelf inside the boot, near the lights so that you can find the nut which holds the entire unit in place. It is also held with a push in grommit, so be careful when you remove the rear light fitting. When you have it out you will see that all bulbs are marked and held in with a half turn connector, much like the fitments that hold the bulb in place.
how do I get light cover .Have removed 2 screws can't seem to get it off to replace bulb
2004 Kia Rio Base
-
Maintenance & Repair
When removing the rear shocks from a 2003 Rio, do you need access to the backside when removing the top 2 bolts? I can't find any access point from inside the trunk. Do the bolts thread onto a permane...
2003 Kia Rio Base
-
Maintenance & Repair
i have too tap the lens too get the light too come on my side/indicator light bulb. How do i get at the back of the bulb
2003 Kia Rio
-
Maintenance & Repair
My stepson is going through rear tires he cannot afford on his 2004 Kia Rio Cinco. The tire guys says he has no idea why; there is nothing to adjust or align on the rear axle. Thinks there must be...
2004 Kia Rio Cinco
-
Maintenance & Repair
2016 Kia Rio
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.