Hi. Just tonight my 2004 GMC Envoy transmission crapped out. I was doing highway speeds when I noticed high revs, then it car slowed down. I was able to nurse it to an exit by shutting the vehicle off, waiting a minute or 2, then starting it. each sucessive time tho, it ran for less time. Police had to push me up and off the road. Currently waiting for AAA to tow it home. Any suggestions? Google says perhaps a solenoid.

Hi. Just tonight my 2004 GMC Envoy transmission crapped out. I was doing highway speeds when I noticed high revs, then it car slowed down. I was able to nurse it to an exit by shutting the vehicle off, waiting a minute or 2, then starting it. each sucessive time tho, it ran for less time. Police had to push me up and off the road. Currently waiting for AAA to tow it home. Any suggestions? Google says perhaps a solenoid. 1 Answer

I have a 2004 Envoy. When shifting from reverse to drive, there is a 2-3 second hesitation until it engages. Fluid level is fine. Any suggestions? 3 Answers

I have a 2004 Envoy. When shifting from reverse to drive, there is a 2-3 second hesitation until it engages. Fluid level is fine. Any suggestions?

I have a 2002 Envoy with a 4.2 engine four by four my temperature gauge work sometimes and sometimes it doesn't now when it doesn't work and I cut the car off it's hard to get it crank but it will cra 1 Answer

I have a 2002 Envoy 4.2 Engine 4 by 4 now it cranks good and stars good but the engine temperature gauge works and sometimes it doesn't and when it doesn't work in a cut the car off and I tried to...

Everything was working f and now we can't get it to open up properly we think the thermostat might be bad just trying to figure out exactly how to bleed the system we're having a hard time finding the 1 Answer

just change the water pump and we're trying to figure out why we can't get the thermostat to work properly it's overheating and I wasn't having the problem before changing the water pump and ther...

My GMC Envoy has a new battery and ran fine for about a month, but now it will do nothing. Even with a charger or jumpers connected. No lights, No signals nothing .. It doesn't turn over or even click 2 Answers

I bought a new battery and had it installed. A month later the POS stopped running all together. I had jumpers hooked to it and it won't even collect a charge. The ports are all clean as well. It wi...