My 88 bronco was driving fine yesterday and today it is only going into reverse it will not engage into neutral or drive the shifter feels as if it's hitting something and it's not allowing full moven

My 88 bronco was driving fine yesterday and today it is only going into reverse it will not engage into neutral or drive the shifter feels as if it's hitting something and it's not allowing full moven 1 Answer

My 1987 ford bronco 2 is having problems running while cold. especially if I drive for a few minutes and then shut it off. I come back out of the store or whatever and it acts like it's being flooded out. It sputters and dies horribly. It's the 2.9 liter v6. Once it is fully warmed up it runs great 1 Answer

dies when cold. acts like it's being flooded out when only partially warmed up and runs fine when it is fully warmed up.

88 Bronco 2 will not start 1 Answer

I bought A 88 Bronco2 2.9L v6 4x4 it ran but after replacing fuel lines,both pumps, and filter it starts but will not stay running. it gets gas to the carb

i have a 1985 bronco ii and when i start it it makes a grinding noise just when i go to start it. when it runs it is fine. We pulled the starter and checked the flywheel and you can see where it is nicked but im not missing any teeth. the starter had shavings in it. Replaced the starter once it was fine for the first couple starts then sttarted grinding again. any sugjestions? 3 Answers

1985 bronco ii. 5-speed, 4x4, half year so some parts are 1984 and some are 1985.

would my 1989 Ford Bronco be losing power if the exhaust manifold has a crack in it? and it's making a whistling noise when trying to get up to speed? 1 Answer

the mechanic working on it is saying that there is a crack in the exhaust manifold.....