on my 88 4runner my pl ug fr the engine to tne ignitor bad cant find wires are different colers each side of plug want to eliminate plug help

on my 88 4runner my pl ug fr the engine to tne ignitor bad cant find wires are different colers each side of plug want to eliminate plug help 2 Answers

I just finished doing head gaskets on my 91 Toyota 4Runner. I'm having a problem with it overheating when I put a load on it. Like accelerating up a hill. It also seem to have a little miss to it . I just pulled the timing cover back off and my marks line up. I put new plug wires on. The water pump I replaced about 8 months ago.Any ideas as to why I'm over heating ? 7 Answers

Overheating problem on 91 Toyota 4Runner

How to get water out of my Toyota 4Runner 3.0 3 Answers

So the other night I sunk my 1994 Toyota 4Runner st5 3.0 in a nice size water hole. The whole passenger side was under water. I got it pulled out it fired right up And it ran for about 3 minutes t...

One of the wires connecting the to my left front turn signal socket broke as I was trying to remove a stubborn light bulb. Easy fix? 4 Answers

I tried to replace the bulb in my left front turn signal. Hard to get to due to battery location, but I managed to get the socket out of the plug. Could not get the bulb out of the socket -- really ...

do i have to pull the engine to change water hose link on a 1995 toyota 4runner 4x4 v-6 water leak is some where in back of engine 1 Answer

o i have to pull the engine to change water hose link on a 1995 toyota 4runner 4x4 v-6 water leak is some where in back of engine