I just change the cam sensor on my 1999 Chrysler 300 M and now the ignition key will not turn its locked
6 Answers
migration_judge_roy answered 10 years ago
having a whole lot of trouble connecting the dots here...am guessing the battery is a goner because a battery that is older than 5 years old is gonna cause you problems....with the alternator...with all the electrical components....recommend that you undo the 1/0 black battery cable that attaches to the chassis/ground and wirebrush it clean so that 300 amps can easily get through~
migration_judge_roy answered 10 years ago
...and get a NEW battery...a good one like Interstate, prestolite or NAPA even~
The ignition key itself will not turn forward.
Have you tried turning the steering wheel while moving the key? Maybe the steering is locked.
migration_judge_roy answered 10 years ago
that's why I'm thinkin that it needs good power to enable...the interlocks have shut "the key" solenoid off~ just needs good power~will check the forums on this problem~
migration_judge_roy answered 10 years ago
okay...here's one solution~~Hold foot on brake , put key in ignition, then with the other hand turn the steering wheel left and then right, right quick and it should start.