I have a 2000 Dodge Durango Sport. I can put it in 4wheel drive and it goes but when I take it out of 4wheel drive and put it in drive or reverse it goes no were. What is the problem and how can I fix

I have a 2000 Dodge Durango Sport. I can put it in 4wheel drive and it goes but when I take it out of 4wheel drive and put it in drive or reverse it goes no were. What is the problem and how can I fix 5 Answers

I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put it in ( N, R, D, 1, 2 ) My first guess is the transmission went out, but could there be a sensor or other cause for this. When I accelerate, I hear the engine, but still have no movement in any gear. 8 Answers

I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put ...

I have a 2005 Dodge Durango ST 4x4 automatic, and every now and then when I put it in reverse there will be these gears grinding. I have no idea what this could be. can anyone help? 2 Answers

if I put it in reverse and just turn the wheel a little bit the gears grind even more and louder that's when I hit the brakes put it in park turn off the car and turn it back on and it will be fine. I...

I have a 2000 Dodge Durango starts runs idles fine I can drive it but as soon as rpm gets about 3000 it like chokes out and smells like fuel and carbon. Any ideas 1 Answer

I can get the rpm to go up if i manualy put it in 1st or second on the column and hardly press on the gas. I recently bought the durango and dont know much about them. I have changed all 8 plugs a...

2001 dodge durango the sercice 4wd light comes on and the 4wd switch light goes out. If I pull the fuse and put it back in it works again. What could it be? 2 Answers

2001 dodge durango 4WD, switch goes out. If I pull the fuse and put it back it seems to work for a little while. I even put new fuses in the engine fuse box. Any ideas?