It's easy. The map light lens has two rocker points that the lense pivots on when the lense is pushed for on and off. A flat tool like a small, thin screwdriver or a butter knife from the table silver wear Drawer is the type of thing you need. Insurt the tool along the edge of lense close to the rocker points and pry lense off. Bulb to be used in in the owners manual.
2005 Chrysler Crossfire Roadster RWD
-
Maintenance & Repair
When this happened, my key fob didn't work for entry, the key in the door set off the alarm and inserting the key in the ignition to try to start the car and to get the alarm shut off didn't work ...
2007 Chrysler Crossfire Limited Roadster RWD
-
Maintenance & Repair
Glass has become detached from the top, at the top. Glass is secure at the bottom. Top is in great condition Is there a way to restick the top of the glass?
2006 Chrysler Crossfire Limited Roadster RWD
-
Maintenance & Repair
Ive got the part, just need to know procedure to replace......Thanks in anticipation
2004 Chrysler Crossfire
-
Maintenance & Repair
Key will not go to start position all the time however If I crank the steering well from side to side then it seems to engage the lock system and finally will release so that it will go to start pos...
2004 Chrysler Crossfire Coupe RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.