My module says the electronic spark timing circuit (bypass) is bad. I am striking out finding one for a 1991 Buick Park Ave w 3.8 L eng. It looks fairly easy to fix but I need the part. Suggestions? Thanks in advance for understanding an old mans questions!

My module says the electronic spark timing circuit (bypass) is bad. I am striking out finding one for a 1991 Buick Park Ave w 3.8 L eng. It looks fairly easy to fix but I need the part. Suggestions? Thanks in advance for understanding an old mans questions! 1 Answer

will a 3.8 reg out of a 1991 buick park ave work in a 1996 chev camaro ? 2 Answers

i have a 1996 chev camaro that has a 3.8l v6 auto in it that blew i also have a 1991 buick park ave 3.8 non super charged auto , im wondering if i can swap it into the camaro n make it run ect if ...

When I turn the ignition key on to start my 2002 Buick Park Avenue 3800, the fuse blows for the ignition control module. Is this a common issue and where would I start troubleshooting on this problem? 6 Answers

The 10 amp fuse for the control module blow as soon as the key is turned to the run position.

Why won't my 1999 Buick Park Ave start after I switch the trans from a 98 Buick? 4 Answers

I have a 1998 Buick Park Ave. and a 1999 Buick Park Ave. both have the base transmission and I installed the 98 transmission in to the 99, The only thing I found that's different between the two is ...

Looking for a Radiator Drain Plug for the 1998 Buick Park Ave 2 Answers

Look for a Radiator Drain Plug for the 1998 Buick Park Ave. Part is discontinued. Part # ACDelco 52453065