Asked by Brent Jan 27, 2021 at 09:58 AM about the 2006 Nissan Titan SE King Cab 4WD
Question type: Maintenance & Repair
I replaced all my actuators, heater core, heater
control valve, thermostat, and radiator. But, the
current going into my heater control valve is still
cool to the touch and not really feeling in warmth in
the hose.
I replaced all my actuators, heater core, heater control valve, thermostat, and radiator. But, the current going into my heater control valve is still cool to the touch and not really feeling in wa...
2006 Nissan Titan SE King Cab 4WD
-
Maintenance & Repair
Heater only blows out cold air, yet my AC works fine. What do u think problem is?
2010 Nissan Titan SE Crew Cab LWB
-
Maintenance & Repair
While driving sometimes the heat turns off, but then comes right back on. What would cause this?
2007 Nissan Titan King Cab SE 4WD
-
Maintenance & Repair
My 2004 Nissan Titan heater blows cold air while idling but hot air when driving. At first it would only blow cold air but I found that the coolant level was low - I believe I have a slow leak in t...
2004 Nissan Titan XE King Cab 4WD
-
Maintenance & Repair
I have a 2015 Nissan Titan Pro-4x. I just towed w/I for the 1st time last week. When I plugged in the lights, I had brake & turning lights but I had no running lights. At 1st I thought it was the tr...
2015 Nissan Titan PRO-4X Crew Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.