I have a 2002 dodge ram , When i put it reverse it makes a horrible noise and wont ingage, i put in a new transmission and a transfer case shifter control rod and its still not ingageing , Can you pl

I have a 2002 dodge ram , When i put it reverse it makes a horrible noise and wont ingage, i put in a new transmission and a transfer case shifter control rod and its still not ingageing , Can you pl 1 Answer

I have a 95 dodge ram that I am having problems with no reverse. The truck is not worth enough to drop a lot of money on a new or rebuilt transmission. Im not a mechanic, but like to tinker. The truck had issues with forward gears but reversed was working, I didnt have the money to fix so I let it sit for over 3 yrs. I decided to tinker with it, I replaced the control solenoid, filter and fluid. now all forward gears work great but when I put it into reverse, It will back up slowly on its own, but if I give it gas it just revs up like its in nuetral and it vibrates like its trying to back up but wont go. Fluid level is good, nothing was found in the pan (very little shavings). Could it be air in the lines? bands need to be adjusted? or what? 1 Answer

reverse issues

i have a 2004 dodge ram 1500 5.7 slt and it died on me in traffic,,, it tries to start but wont stay running i already put a new altanator in it but its still trying to start but it wont stay running 2 Answers

it tries to start but then it dies any idea what the problem could be? i already put a new altanator in it

I have a 1998 Dodge ram 1500 just rebuilt the transmission and put it back in the truck. now the truck will turn over but will not start. 1 Answer

i replaced the cam shaft postion senor that did not work.. i am not getting spark but i am getting fuel and compression. i tested the battery it is still good..you can still hear the fuel pump kick on...

i have a dodge ram 1500 with a 5.2 v8 it has a dead spot in the throttle and now over drive does not work 1 Answer

I change the oil pump and the rod under the distributer that runs the pump and now I got a dead spot in the throttle that was not there before and now it wont shift into over drive and it has a loud ...