A starter was being replaced on my '01 Dodge 1500 v6 magnum truck and the mechanic shorted out the starter by touching it to metal. Now, the truck will not start. Suggestions? ? Thank you.

A starter was being replaced on my '01 Dodge 1500 v6 magnum truck and the mechanic shorted out the starter by touching it to metal. Now, the truck will not start. Suggestions? ? Thank you. 3 Answers

I have a 1998 Dodge ram 1500 just rebuilt the transmission and put it back in the truck. now the truck will turn over but will not start. 1 Answer

i replaced the cam shaft postion senor that did not work.. i am not getting spark but i am getting fuel and compression. i tested the battery it is still good..you can still hear the fuel pump kick on...

I have a 1998 Dodge 1500 5.9L truck. Rats have eaten the wiring harness and I need to replace it. Will the wiring harness from another 1998 dodge 1500 5.L truck from the salvage yard fit my truck? 1 Answer

I have a 1998 Dodge 1500 5.9L truck. Rats have eaten the wiring harness and I need to replace it. Will the wiring harness from another 1998 dodge 1500 5.L truck from the salvage yard fit my truck? ...

i have a 2002 dodge 1500, 4.7. It will crank but not start, replaced the CAMshaft and crankshaft senors, replace all plugs, fuel tested ok, we can here the fuel pump engage, we have spark and that last thing we just did was changed all the timing chains (it was out of timing) but the truck still will not start. Help on what could be next? Thanks 42 Answers

2002 dodge 1500 4.7 cranks will not start.

98 Dodge Ram 1500 5.9L V8 Mag. so i drove it the other morning and then was messing with Therm sensor and something shorted out. Now my check engine, trans temp and overdrive off light are on. It turns over but not starting, replaced the fuel relay and crank position sensor. Still will not start, could it be the PCM/ECU? someone please help.... 6 Answers

IS IT A BAD PCM/ECU?