my son has a 99 dodge 4x4 1/2 ton, he has been experincing sliping in the shifting for awhile. then he was leaving for work and when he put the truck in reverse a very loud noise was heard and the truck stalled. now as soon asyou put it in reverse it stalls, but if you put in a foward gear it dosent stall andwill move. any thoughts will be app. thank you

my son has a 99 dodge 4x4 1/2 ton, he has been experincing sliping in the shifting for awhile. then he was leaving for work and when he put the truck in reverse a very loud noise was heard and the truck stalled. now as soon asyou put it in reverse it stalls, but if you put in a foward gear it dosent stall andwill move. any thoughts will be app. thank you 1 Answer

I have a 95 dodge ram that I am having problems with no reverse. The truck is not worth enough to drop a lot of money on a new or rebuilt transmission. Im not a mechanic, but like to tinker. The truck had issues with forward gears but reversed was working, I didnt have the money to fix so I let it sit for over 3 yrs. I decided to tinker with it, I replaced the control solenoid, filter and fluid. now all forward gears work great but when I put it into reverse, It will back up slowly on its own, but if I give it gas it just revs up like its in nuetral and it vibrates like its trying to back up but wont go. Fluid level is good, nothing was found in the pan (very little shavings). Could it be air in the lines? bands need to be adjusted? or what? 1 Answer

reverse issues

My truck was low on trans oil for awhile and I didn't notice then I added some, it's been awhile now but in the morning when I crank it up it knocks sounds like it's at the transmission area, 8 Answers

It doesn't sound like a stuck lifter cause it doesn't tick it just knocks for a min. Is there any chemicals I can try before I spend money on getting expert opinions then spend alot getting it fix...

I have a 1998 Dodge ram 1500 just rebuilt the transmission and put it back in the truck. now the truck will turn over but will not start. 1 Answer

i replaced the cam shaft postion senor that did not work.. i am not getting spark but i am getting fuel and compression. i tested the battery it is still good..you can still hear the fuel pump kick on...

Why does truck stall if I put it in gear 2 Answers

I bought this truck it ran fine for two days no leaks no nothing everything real quite. Then i went out following morning couldn't get it running so I thought fuel pump. I bought a new fuel pump pu...