When u press brake pedal it goes straight to floor
2 Answers
Check brake fluid reservoir. If it's full then the master cylinder internal seals are shot, and it needs replacing. If one or both cylinder tanks are empty, fill it, and look for a major leak as someone is pumping the pedal. Check the lines, calipers, connectors at all four wheels. The master cylinder can also leak so check that area also.
3 people found this helpful.
Once you figure out where it's leaking, replace that seal or hose, refill the brake fluid reservoir, and make sure to bleed the brakes from each caliper, starting with the rear ones, then do the front. Make sure there's no air left in the system.
