My dad had a 1941 Plymouth Pick up he bought to restore and its in parts. What is it worth?

Asked by teelee926 Oct 01, 2015 at 02:05 PM

Question type: Car Customization

My dad had a 1941 Plymouth pick up to restore. He died a couple months ago and was never able to do so. It is all apart and he also CHOPPED the top!!Most all the parts are there but not back together. I wanted to know what I could get out of it realistically. I don't work on restoration projects and wanted to sell it but have no Idea what to ask or even who. I appreciate your answer...

70,075

Kelly answered 8 years ago

nor do i/ we... stock? drive train? tell me more !!! send pictures............

Mark helpful

44,815

jamnblues answered 8 years ago

The Plymouth is rare- and if it has no rust, there are quite a few who will be interested in it- and know how to put it back together- the problem is the chopped top- that will turn these kinda people off- and put it into the realm of "rodders" and I'm afraid you won't get as much from them- put an ad in Hemmings news, ask $4000 for it and see what you can get-

Mark helpful

Your Answer:

My dad had a 1941 Plymouth Pick up he bought to restore and its in parts. What is it worth? 2 Answers

My dad had a 1941 Plymouth pick up to restore. He died a couple months ago and was never able to do so. It is all apart and he also CHOPPED the top!!Most all the parts are there but not back together....

Dodge

-

Car Customization
I was putting a new radio into my 03 Ram 1500 and just to make sure the radio worked in it.I must have not protected a couple of the wires all the way and a couple of the wires touched on the back of the radio. after the fact, the courtesy light wont come on when opening the door, and Pretty much all the functions that a vehicle is supposed to perform without turning on the vehicle don't work. and neither does the radio when I hook it up. Yes, i checked all the fuses in my fuse box. I even wen to the point of replacing all of the, even the ones that i thought had nothing to do with the situation. the radio still works because i checked it by putting power to it by directly putting it to the battery. and the fuse didn't pop in the back of the radio when all this happened. so at this point I'm completely lost. Any help with this would be much appreciated. 1 Answer

Putting in a new radio, a hot touched something and now nothing works.

2003 Dodge RAM 1500 ST RWD

-

Car Customization
Is it ok to swap a 46rh to a 46re? 2 Answers

I have 97 dogde ram 1500 reg cab 2x4 5.9l, the tranny that it has i believe it is the 46rh( my transmission has the OD end pointy) but it is going bad its stuck on third gear. I found some one s...

1997 Dodge RAM 1500 LT RWD

-

Car Customization
how do i remove the factory radio in my 93 dodge ram 250 deisel pick up? 1 Answer

the radio gave out and i want to replace it i need to know what i have to do to remove the old radio to put a new one in

1993 Dodge RAM 250 LE LB RWD

-

Car Customization
I want to beef up a 96 dodge 1/2 ton to tow a 2000 25' Prowler Lite 824-5C. What do I need to do to it? 2 Answers

going to be travelling for a couple of years and want to keep my 96 Dodge Ram 1500 shortbed SLT. I have a 2000 Prowler Lite 824-5C I'd like to tow and am wondering what it would take to turn the 96 ...

1996 Dodge RAM 1500 LT 4WD

-

Car Customization

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.