Does anyone know where I can obtain the metal clips that hold wiring connections together on a 2001 Tiburon?
The clips are a squared C shape and hold the connectors together.
sixfootsix_car_guy answered 8 years ago
From a salvaged or junked Tiburon or Elantra (they are the same wiring harness). I would start there, otherwise the parts counter at your local Hyundai Dealer. (Even an auto parts store might have them). I hope this helps! Best of luck!
The clips are a squared C shape and hold the connectors together.
Hyundai Tiburon
-
Maintenance & Repair
Ive been trying to replace the water pump in my tiburon and was told I needed to remove the idler pulley to get to the timing cover and get it off so I can get to the bolts on the water pump
2001 Hyundai Tiburon
-
Maintenance & Repair
Just bought a 2004 tiburon and I dont know if there is a change oil light like my 98 civic had. I just want to make sure I can take care of everything on my own. Thanks
2004 Hyundai Tiburon GT FWD
-
Maintenance & Repair
I No problems before this issue! This all started when the only keyless remote I had broke and had to be replaced. I got 2 new remotes and had them programmed at the dealership. Several weeks later ...
2006 Hyundai Tiburon GS FWD
-
Maintenance & Repair
I replaced the blower relay, the blower resistor, and the fuse. am now attempting to replace the switch. Not sure what to go for next.
2000 Hyundai Tiburon FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.