1998 dodge truck misses and stalls when put in reverse
So I have a 1998 dodge ram 3500 4x4 dump truck
and it started acting up in reverse missing and
sputtering.quiting some times and now it does
similar things in the forward gears. Cap rotor wires
and plugs have been changed.
Check for vacuum leaks and check fuel pressure
I was leaning more towards ignition the tack also jumps around when it is missing. What should the fuel pressure be?
minimum 35psi. The tack jumps because the rpm's are fluctuating, but check spark as well. Check the distributor shaft itself to make sure there's not too much play on it, that will cause timing issues
Fuel psi is at 55 so that seems good I took the coil off to have it checked then I can go from there unless there's something I'm missing the distributor shaft seems normal and there are no vacuum leaks that I can detect
Ur in the right track. Process of elimination