If my 1971 Beetle automatic stick shift grinds when only putting in reverse, do I need to replace the control valve. Can't get into reverse at all now.

If my 1971 Beetle automatic stick shift grinds when only putting in reverse, do I need to replace the control valve. Can't get into reverse at all now. 1 Answer

My 2000 beetle sways real bad in the front when the roads are wet and raining. but when dry you can hardly feel it at all like there is nothing wrong but when wet it was put me sideways in the road and it is so bad it is going to get someone hurt or killed if not fixed. but have no idea what it is because I never had something act this way. 2 Answers

When it is raining or wet the 2000 beetle rolls and floats side to side in the front end, and like today I went to Lexington Kentucky from Nicholasville Kentucky and the roads were wet and it was ra...

Got my '70 beetle to idle now, but it stalls when I try to put it into gear 1 Answer

Hi everyone, I am doing my first reno on a 1970 Beetle. After replacing some key components I have finally achieved idle !!!! But now when I try to put it into gear it stalls. Oh BTW it a automati...

Why do the bulbs on my 2001 vw beetle keep blowing when i replace them? 2 Answers

I have a 2001 vw Beetle and every time i replace the bulb in the headlamp the other side blows the bulb.

just got a 99 vw bug with 2.0 engine. I need to replace the water pump, I have serp belt off and the 2 timing belt covers off, if I don't move the cam and crankshaft pulleys in the removal and reinstallation, do I still have to get pulleys lined up and get #1 cylinder to top dead center? 1 Answer

replacing water pump, I have to remove timing belt, but do I have to get #1 cylinder to top dead center if the pulleys are'nt moved? serpentine belt and 2 timing belt covers are off, timing belt is...