I have a 1996 Chevy Xpress van 2500 with a 5.7L Vortec, I installed a new Fuel pump, but if I drive it for an hour or so? It will not start, It cranks but will not start, If I pour some gas into it t

I have a 1996 Chevy Xpress van 2500 with a 5.7L Vortec, I installed a new Fuel pump, but if I drive it for an hour or so? It will not start, It cranks but will not start, If I pour some gas into it t 3 Answers

I have a 1998 Chevy Silverado 1500 and I just put a brand new fuel pump in it and a New fuel filter. When I try to,stat it, it will not stat unless I poor gas in the tb and it will idle but when u giv 4 Answers

It gas it want to spit and spudder and,when it,get hot and u,try to put it,in drive it will just die and want start back up please help me to figure it out

I have a 1998 chevy 1500 with the 4.3 v-6 vortec. The problem I'm having is that when the truck sits for a long period it does not start back. Can anyone help me?? 2 Answers

If I put gas into the throttle body it starts and runs fine. I can stop it start it etc etc. But if it sits for longer than 6 hours or so I have to put more gas into the throttle body. Also when I...

I have a k1500 chevy pickup with a 350 motor It will not start all the time and shuts off when coming to a stop sometimes. 1 Answer

There is no ground single coming from the ecm to the injectors. I have replaced the ecm and throttle position, air idle, and map sensors. I also checked the ground wires and cleaned the conections.

1996 Chevy Silverado K1500 with a 5.7L it will turn over but won't start. I'm not getting any fire to the plugs 1 Answer

Replaced the engine now it's not getting any fire to the plugs, I've replaced the Ignition Switch, Ignition Module, Ignition Coil, Distributor Rotor (cap looks good), both connectors to ignition mod...