My exhaust manifold is glowing red any ideas what could be the problem. I changed the PVC valve.spits and sputtering at ideal
I changed the PVC valve and I don't know if it was
doing it before.
Asked by Speedster_1410 Jan 27, 2017 at 12:21 PM about the 2003 Ford Taurus
Question type: Maintenance & Repair
I changed the PVC valve and I don't know if it was
doing it before.
I changed the PVC valve and I don't know if it was doing it before.
2003 Ford Taurus
-
Maintenance & Repair
drive about 5 miles after replacing radiator and it ran hot
1996 Ford Taurus GL Wagon
-
Maintenance & Repair
My 05 Ford Taurus is idling rpm up-and-down what could that be I notice it when I'm at a standstill at a light or stop sign
Ford Taurus
-
Maintenance & Repair
car comes out of drive at a full stop
1996 Ford Taurus GL Wagon
-
Maintenance & Repair
Idle is messed up. Runs high when I start it and wait about 1 minute till it gets to 900 rpm. Then, it start fluctuating dowm till it stalls out. Replaced the IAC And some sensor but my mechanic can...
2003 Ford Taurus SES
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.