GMC Sierra 1500 Questions Car Customization
Can I Splice Wires From LED Strips Directly Into Wires Connecting An LED Li...
The light bar has 4 wires, one goes right to the battery, one is a ground, and two go to a switch inside the cab.
What Options Do I Have For Radio Upgrade?
I have a 1988 GMC Sierra C1500 and the original radio (a Delco Model # 16071015) has buttons that no longer work, I can't adjust volume, change stations easily. Is there a product out there I could ...
I Unplugged Mass Air Sensor To Change Air Filter Over To A K & N. I Forgot ...
I found what I did and plugged back in. Truck starts and runs fine. Only issue is check engine light stays on. Do I have to go back to deaer to clear a code or something?
I Have Stock 16 Inch Rims Can Put A 20 Inch Rim On The Truck Without Puttin...
if 20's don't fit what size is recommend to give a four why drive look?
Tires And Rims
what size rims and tires will fit my 1981 gmc 1500 want wide in back smaller size in front not skinny on front want that old school look wide in rear hot rod 383 truck 30,000 invested in truck want ...
Can I Fit A Mid-60's Stepside Box On A 1994 GMC Sierra Short Box?
I can get the box for free and am hoping it won't be difficult to swap over.
I Have Several Questions About Upgrading Suspension Of A Gmc Sierra 1500 5....
Would a lift kit or leveling kit be more beneficial? Do the kits come with the coils, torsion bars, or added leaf springs to beef up the suspension too? Would a kit increase truck weight and how ...
Where Do I Put The Lines That Go Into My Valve Covers On A 1988 Gmc Sierra ...
I'm replacing my old valve covers with new aftermarket eldelbrock valve covers and im not sure where to put the old lines that went to the old valve covers.
Looking For Input On A V8 Swap, Stock Heads Or Vortec?
Hi, I own a 91 GMC Sierra 4WD Standard Cab Stepside with a 4.3 litre V6 and 5 speed transmission. I've put a lot of work into her already, as I do bodywork for a living. I plan on doing a V8 swap this...
Will A 6 Lung Center Line 15x10 Rim Fit On A 2001 Gmc 1500 Without Hitting ...
Std 2 wheel drive, 4 wheel disc , SLT
Can I Put Crew Cab On 1994 Gmc Regular Cab Frame
I have a 1994 standard cab that I would like to put a crew cab on.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.