Ford Ranger Questions Maintenance & Repair
1998 Ranger Has A Beeping Noise Coming From The Dash What Is It?
If you start the vehicle and let it idle for about 2 minutes a beeping noise like a warning sound starts coming from the dash, nothing comes up as a code and no warning lights are on. It will stop for...
Wiring Harness Diagram
i need a diagram for the wiring harness and dont know where to get one
I Need The Timing Belt Design, Please!
i need the exploded view, and count part detail.
Truck Lights Work But When You Hook Up To Trailer Left Side Sosen't Work On...
truck lights work but when you hook up to the trailer left side dosen't work on trailer
Fuel Pressure Problem After Running A While
With a gauge on the fuel rail the pressure checks OK.40# with just key on and 35# running sitting in the driveway. It goes up when you take the vacuum line off and it also hold pressure well when tur...
Where Is The Spare Tire?
My daughter has the car at work with a flat - where is the spare tire - is it under the truck?
Still Won't Start
i did that firing order and it still won't start,what else could it be, i don't smell gas when i continue to turn it over, please help
Where Is The Backup Switch Located On Manual Transmission?
my backup lights don't work. I wanted to add a backup camera that runs of the backup light power. The bulbs and fuses are ok. It may be the backup switch or wireing. Where is the backup switch loc...
Where Is The Backup Switch Located On Manual Transmission?
Where is the backup lights switch located on a manual transmission model?
What Is The Firing Order?
I need to know the number for each cyclinder its a 2.9 V6 1989
Whats Rear Lock Mean??
I cant shift to reverse why??
Is There Any Way I Can Get A Better Diagram Of The Vacume Lines Other Then ...
We just did a carbarator rebuild and major tune up. Now the truck is "sufficating". I know there is a problem with the vacume, but we're having trouble following the diagram that's under the hood.
How Should A Hydraulic Clutch Be Properly Adjusted
On a hydraulic clutch on a 95 ranger, how would a person bleed the air out of the clutch and how should it be adjusted
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.