How long does it take for the evap and condenser codes to stop flashing after they have been reset

Need to have from 1/4 to 3/4 tank of gas before it will cycle, it may take a few days.

I have about a half a tank and have driven about 75 miles .

The only code that is showing is a c1245 code. Talked to a mechanic and he said the condenser and evap codes take longer to calculate since i live in upstate NY

That c1245 code has to do with the ABS system. C1245 - ABS Outlet Valve Coil LR Circuit Short To Ground

Thats just it i do not have a abs issue. i also heard it could be the tire pressure sensor which is linked to the abs

c1245, ABS outlet valve coil LR shorted to ground. So I am taking this as something wrong with TPMS at the Left Rear wheel valve stem? What do you think Js08016?

ok i have since replaced the egr valve and thermostat . how long you think before the c and evap clear . i have no codes showing and cel is not on

I did not have any codes prior to replacing the egr valve. i replaced it yesterday and as i was driving today the cel came on and the scanner displayed the p0401 insufficient egr flow. Any ideas . Thanks

I did that now just have to hope the computer reads all monitors