That trick won't work your check engine light was on for a sensor sending a malfunction signal to the car computer, most likely you tripped a fuse, check your fuse box, all of them should be marked, it is easy to see if it is blown.
After removing a Battery Cable some cars have to be reset for some functions to work ..It happened on my Mercedes..
MY CHECK ENGINE LIGHT WAS ON SO WE TOOK THE BATTERY CABLE OFF TO REST IT AND GET IT OFF, BUT NOW AFTER WE REPLACED IT THE PASSAGER SIDE WINDOW WONT GO UP OR DOWN WHY?
2006 Pontiac G6 GT Coupe
-
Maintenance & Repair
It works sometime and other times it don't . I was on another site and someone mentioned it might be a sensor that can't recognize if the door is open or closed so the window wont index. If that the...
2007 Pontiac G6 GT Convertible
-
Maintenance & Repair
followed a1 auto video on how to remove the lca. and replacement. replacement was difficult to get two bolt lined up that bolt through frame or unibody. it squeala when I turn both ways . mostly l...
2006 Pontiac G6 Base
-
Maintenance & Repair
my 2009 g6 gt wont start. i got a jump it started but then the partial car/lock symbol came on and stayed on when i shut the car off after letting it run for 2hrs, it didnt start up again why?
2009 Pontiac G6 GT
-
Maintenance & Repair
Every time I tried to start before I knew starter was fired it would smoke and my battery drained way faster than it should have. I just dont want to replace the alternator and starter again and hav...
2006 Pontiac G6 GT Coupe
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.