my brake pedal wont come up unless you pull it up put on new bosster new brakes what now
1 Answer
firebird338 answered 7 years ago
Check the vacuum going to the brake booster. Maybe a bad check valve.
firebird338 answered 7 years ago
Check the vacuum going to the brake booster. Maybe a bad check valve.
1999 Mazda B-Series B2500 SE RWD
-
Maintenance & Repair
We just got it back on the road today!
1990 Mazda B-Series B2600i Extended Cab RWD
-
Maintenance & Repair
Own a 1989 mazda b2600 4wd pickup and have changed brake MC, front calipers & rear wheel cylinders and bled all. also changed the brake booster but still hard to press on brake pedal. it still ho...
1990 Mazda B-Series B2600i 4WD
-
Maintenance & Repair
have a mazda pickup that has rebuilt head and engine have replaced the injectors,oil,filfter,head gasket,head,and starts runs great till geats warm then dies no warning any idea what this could be ...
1993 Mazda B-Series B2600i Extended Cab 4WD
-
Maintenance & Repair
Well the thing won't crank or start. This is what I have done so far. I wanted to put a RPM meter on it. I followed YouTube videos on how to do it. I cut the Tan wire w. the yellow stripes & try t...
1996 Mazda B-Series B2300 RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.