Traveling at 30 grandson pushed shifter to reverse ,stoped as soon as possible pulsing grinding noise but seems to be fine

Traveling at 30 grandson pushed shifter to reverse ,stoped as soon as possible pulsing grinding noise but seems to be fine 1 Answer

Struggle to get the truck in 1st 2nd and reverse when engines running could it be low gear box oil? 4 Answers

Goes in gear fine when engines off but sort of grates or doesn't go in 1st 2nd or reverse when engine running what could it be as want to sell the truck

2006 Ranger when I open the door all interior lights come on and when I first put the key in the ignition I get dash light but as soon as I turn the key in the igintion I hear a click and all goes dea 1 Answer

Have interior light when I open the door and when I put the key in the ignition at 1st turn I have dash lights but as soon as I turn the key all the way to start I hear a click and all goes dead. No c...

i have a 1989 ford ranger 2.3L engine and manual 5 speed trans. my truck will not idle as long as the alternator is plugged in but idles and runs fine with it unplugged 2 Answers

i have replaced the alternator, the voltage regulator connecter plug, the battery, the cylanoid,the crank sensor, put a new timing kit on it, and replaced the fuel pump and fuel filter but my truck st...

Grinding noise when brakes applied. 4 Answers

I have a 1998 Ford Ranger 4 cyl. Sometimes when i apply the brakes it makes a grinding noise, like that of a pad rubbing on rotors. I have replaced the rotors and the pads, and also the bearings. Ye...