You will probably need to drop the Pittman Arm, raise the front trac-bar, either remove or drop the rear trac-bar. Extend the sway bar links, and extend the brake lines. Some say a SYE kit for the transfer case, but I am running a 4" lift with a 1" skid plate drop and the rear driveshaft still works fine.
1990 Jeep Wrangler Islander
-
Car Customization
my jeep is stock no lift & I would like to have wider tires than height, the wheels I got is moto metal 962 18x10 with -24 offset
2011 Jeep Wrangler Unlimited Sport 4WD
-
Car Customization
18 inch stock rims, unlimited sahara, biggest aggressive tred tires no lift kit, would consider 2 inch lift with spacers. so many people are telling me different information. looking for good advice.
2008 Jeep Wrangler Unlimited Sahara 4WD
-
Car Customization
I need new shocks for Fabtech 4" performance suspension, what shoul I get?
1999 Jeep Wrangler
-
Car Customization
my 90 yj has a 2inch suspension lift and a 2 or 3 inch body lift and i cut out about 2 inches of my fenders front and back i have 33s but id really like to put 35s under it and my friends with jeeps s...
1990 Jeep Wrangler
-
Car Customization
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.