There are pump that stays in tank and there are pump that is work in bonnnet.the one in tank are electrical and the one that works in bonnet are manual and for you to know the one you are using,when you open your ignition go to your tank side and listen if it making sound snakes sound and if you are using manual go to the bonnet and you will hear the clicking sound of it.
1992 Jeep Cherokee Laredo 4-Door 4WD
-
Maintenance & Repair
My jeep has an aftermarket electric fuel pump, previously had to be Mechanical, but I guess they swap the engine and that is what I'm left with. The technician did not pass it at the smog, so now I'm...
1986 Jeep Cherokee Pioneer 2-Door 4WD
-
Maintenance & Repair
Do I have to drop the fuel tank to change the fuel pump
1996 Jeep Cherokee Country 4-Door RWD
-
Maintenance & Repair
I have a 92 Jeep Cherokee Laredo 4. 0 straight 6 and I have replaced the fuel pump 6 times I don't know why the pump keeps going out and I don't understand why the pump doesn't sit flat on the bot...
1992 Jeep Cherokee Laredo 4-Door 4WD
-
Maintenance & Repair
I am getting no power to the fuel pump on an 86 jeep Cherokee I bypassed the crank sensor and changed the fuel pump relay I put a new ground cable on it and replaced all the fuses but still getting no...
1986 Jeep Cherokee Chief 4-Door 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.