I'm putting a 302 and C-4 in my 63 Fairlane. Will the drive shaft and Trans mounts work. It has a 260 2-speed Fordomatic in it now.

I'm putting a 302 and C-4 in my 63 Fairlane. Will the drive shaft and Trans mounts work. It has a 260 2-speed Fordomatic in it now. 1 Answer

I have a 1964 Fairlane 500 Sedan with the original V8 260 and 2-speed Fordomatic trans. I want to upgrade just the transmission to a 1964 c4, with a 5 bolt bell housing to match the motor. Knowing the issues with the '64 model year, is this realistic. I'm rebuilding the V8260 to keep at least the motor original. Any thoughts would be greatly appreciated, thanks! 7 Answers

In '65 the V8 260 was dropped, as was the 2speed Fordomatic. So I'm looking for something VERY specific so that I don't have to use a modified 6bolt bell housing c4.

I am wanting to put a 302 in 55 ford fairlane. Will I need to modify the motor mounts 5 Answers

It has a 272 y block in it

I have a 63 fairlane 500. It has a 260 v8 with a ford-o-matic transmission. I was wanting to change to a c4 transmission but I was told that I would have to get a trany from that generation motor because the bolt pattern is different. Is that true? If so can I buy a bell housing that will work? 1 Answer

260ci. 2-speed automatic transmission. 4 door

Engine swap in 68/69 ford fairlane 3 Answers

Asking which engine would be best for a fairlane. We have done paint and I plan on upgrading a lot on the car(suspension and trans included). I’m asking y’all what would be best between a built 28...