1989 Chevy Silverado c1500 5.7L, I had a floppy steeing column issue. Took the column apart and tightened the bolts down. Put it back together but now when I turn the key to ACC, no lights or radio, nothing, not even the click to it. Then when I try to start it, theres no resistance with the key turning and it doesnt start. Im tired of taking it apart and trying to figure out why it wont work. Help is appericated

1989 Chevy Silverado c1500 5.7L, I had a floppy steeing column issue. Took the column apart and tightened the bolts down. Put it back together but now when I turn the key to ACC, no lights or radio, nothing, not even the click to it. Then when I try to start it, theres no resistance with the key turning and it doesnt start. Im tired of taking it apart and trying to figure out why it wont work. Help is appericated 1 Answer

why doesnt my 95 chevy c1500 350 not have pcv valve? it has a hose coming from intake to the valve cover but no pcv. and i bought pcv valve to put in but the gromit hole is way smaller ??? 1 Answer

why doesnt my 95 chevy c1500 350 not have pcv valve? it has a hose coming from intake to the valve cover but no pcv. and i bought pcv valve to put in but the gromit hole is way smaller ???

i have a 95 chevy c1500 v8 200k plus miles. new battery. seems to short out and die, and wont restart. when key is turned on the amp gauge barely moves up. ive tried fumbling with the obvious wires (+ - wires etc) with no change. its done this once before. i let the truck sit for about a month then bought a new batt and problem went away. today while driving it died, with the same symptoms. also ive notice that when driving the blinkers make the amp gauge fluctuate down with every flash. thanks in advance for response 11 Answers

i have a 95 chevy c1500 v8 200k plus miles. new battery. seems to short out and die, and wont restart. when key is turned on the amp gauge barely moves up. ive tried fumbling with the obvious wir...

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...

I have a 1998 Chevy silverado when I turn the key on the fuel pump primes up as it should and I go to crank it and it starts for about 2-3 seconds and then dies 4 Answers

I have a brand new sending unit and fuel pump and there is plenty of fuel pressure and spark cause if I take some starting fluid and spray it into the throttle body it will run fine, I'm stumped ...