Hi, I have a 98 k1500 chevy pick up and my gas gauge is broken it is always vibrating and is always on full of somtimes empty and never in between so i never know how much gas i have does anyone know what is wrong and or how i can fix it?

Hi, I have a 98 k1500 chevy pick up and my gas gauge is broken it is always vibrating and is always on full of somtimes empty and never in between so i never know how much gas i have does anyone know what is wrong and or how i can fix it? 6 Answers

I have a 1989 Chevy Cheyenne 1500, it turns over, the battery is new, all the fluids are fine, but it wont drive forward, itll drive in reverse all day long though, does anyone know what may be wrong and how I can fix it? 1 Answer

Chevy. Cheyenne. 1989. 1500. 4.6 Liter V6 Engine

I need to know where my Camshaft centering sensor is located on my pickup, and how to replace it, can you help? It turns but does not start. 2 Answers

I've tried New fuel filter and new plugs but it still is not starting so I'm thinking the source of the problem is the Camshaft Centering Sensor, but I don't know where to find it on my truck, or how ...

I need help bad. My truck us a Chevy 1500 1995 and if I drive about 30 miles or so and hit a red light and go to hit the gas. I'll have the peddle to the floor and it will start off slow then out of no where kick in and speed up. And if I'm going down the high way and the cruise control is on and I'm going up a hill it will do that. Throttle slow then kick in and speed up. Also when I go to slow down pulling in some where the truck sounds like its about to shut off then comes back to normal. What wrong with it? 11 Answers

Ppl say it is my throttle body or my filter on my fuel pump or its I have no back pressure and my o2 senser is messed up since its straight pipe no cat converter. What is it.

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...