migration_judge_roy answered 11 years ago
perhaps there is a stuck relay...could investigate where the relay box is on your truck, but you could find it and see if you can determined if something in that is burned~
migration_judge_roy answered 11 years ago
the contacts welding themselves together is a totally viable scenario, with the coil powered down...you bet!
2003 GMC Yukon SLT 4WD
-
Maintenance & Repair
We have a 2007 GMC Yukon. All the buttons work except the button to turn on the heated seat for both the back AND bottom of the seat. ( the button for just the back works just fine) why would all b...
2007 GMC Yukon
-
Maintenance & Repair
We have a 2004 gmc Yukon and both driver and passenger side seats stopped heating and driver side seat won't move.is there a certain fuse that controls that?can't find anywhere in books and leather...
2004 GMC Yukon SLT 4WD
-
Maintenance & Repair
I replaced the cushion on the driver's seat, carefully reassembled everything (only 3 or 4 wires had to be unplugged) and the seat now does not move in any direction, but the seat back lumbar suppor...
2001 GMC Yukon SLT 4WD
-
Maintenance & Repair
'06 Yukon Denali has rear turn signal that when you place a new bulb in it, it will not turn off at all. I have taken it to 2 different mechanics and they can't seem to find out the cause. Replaced ...
2006 GMC Yukon
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.