I have a 1986 ford bronco 2 ,2.9liter, auto trans, that will shift in reverse and pull and drive, but when shifted into any forward gears will not engage or pull,can you recommend a quick fix check i can perform without a total rebuild of the transmission

I have a 1986 ford bronco 2 ,2.9liter, auto trans, that will shift in reverse and pull and drive, but when shifted into any forward gears will not engage or pull,can you recommend a quick fix check i can perform without a total rebuild of the transmission 1 Answer

I have a 91 ford bronco that takes forever to shift into rev and drive when started 2 Answers

So when we start the bronco in the morning it starts up just fine, but then it takes nearly a minute before it'll shift into reverse, and even longer to shift into drive. like, you put it in reverse...

I have a 1985 ford bronco xlt i went start it this morning and felt like something broke would not roll overwith ignition. Started it by cylanoid but will not come out of park to go in drive how t Fix 1 Answer

I put a new ignition still wont start or come out of park. Please give me advice with this on how to fix!!!

i have a 1985 bronco ii and when i start it it makes a grinding noise just when i go to start it. when it runs it is fine. We pulled the starter and checked the flywheel and you can see where it is nicked but im not missing any teeth. the starter had shavings in it. Replaced the starter once it was fine for the first couple starts then sttarted grinding again. any sugjestions? 3 Answers

1985 bronco ii. 5-speed, 4x4, half year so some parts are 1984 and some are 1985.

My 1993 Ford Bronco 351 has a miss in it after it warms up what can I do to fix that 6 Answers

I did a tune up and replaced the egr valve