beatupchevy answered 3 years ago
A test light probe , hook the neg to ground and test each side of the fuses .
It is probably the light control module. Contact your local Ford dealer service department along with your VIN number. It may be one of those that the safety recall covers.
I have a 03 crown victoria last night both headlights went out on me ..i could not get them to come back on at all..both bulbs are fine
2003 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
I brought a new motor and they still did not work, I checked all fuses and they still are not coming on. I have a 2004 Ford Crown Victoria PI, the switch still clicks when you turn but the wipers do n...
2004 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
All warning lights I.e. check engine, brakes, engine temp, oil, ABS, etc come on while odometer, rpm and speedometer go out. How do I fix that?
2011 Ford Crown Victoria
-
Maintenance & Repair
How do I remove and replace the headlights on my 1988 Ford Crown Victoria?
1989 Ford Crown Victoria
-
Maintenance & Repair
i got a 93 crown vic my tail lights stopped working the brake lights and turn signals work and the bulbs and fuses r fine how do i fix this?
1993 Ford Crown Victoria
-
Maintenance & Repair
CarGurus has 4 nationwide Crown Victoria listings starting at $8,960.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.