so I got my crank sensor and cam shaft sensor replaced today and as i'm driving home it starts to over heat which it hadn't done in about three weeks. should I get a coolant flush ?

so I got my crank sensor and cam shaft sensor replaced today and as i'm driving home it starts to over heat which it hadn't done in about three weeks. should I get a coolant flush ? 3 Answers

This problem is driving me crazy. I have a 2004 Neon with 2.0 automatic. My temp gauge tells me it is overheating. It doesn't pin in the hot but goes just below. New radiator, thermostat, temp sensor, 54 Answers

About 7500 miles ago my Trans line broke inside the radiator and caused the colong system to fil with Trans fluid. I shut the car down immediately and did not end up with coo Ant in the Trans. I repl...

I have replaced the cam sensor twice and no start condition exhists...have cleared codes with my scanner and still shows code P0340 with a crank but no start condition....Am stumped with 0340 code., 6 Answers

replaced cam sensor 2X...WTH

I have a 2004 Dodge Neon it's a 2.0 and I replaced the camshaft position sensor and the throttle body position sensor because that's what it was telling the computer when I hooked it up at AutoZone. I replaced 1 Answer

I have a 2004 Dodge Neon it's a 2.0 automatic and the check engine light came on so I hooked it up at AutoZone and they told me it was telling them it was the camshaft position sensor so I change t...

I'm having a problem... I have a 2003 Dodge neon and it won't start... Help! 4 Answers

I'm having a similar problem... I have a 2003 Dodge neon. I just got a new powersteering pump put on and the dude said he heard some knocking... we scheduled for it it get checked out the next w...