Create a custom tool from 3/16 steel stock bar with holes drilled out to match those on the sprocket pully. This will prevent the sprocket from turning and f#cking up your timing. Brace the bar against something, ground, engine, whatever you can then turn the center nut to remove the drive sprocket. It will take a considerable amount of balls to break it free.
2001 Audi A6 2.8 quattro Sedan AWD
-
Maintenance & Repair
I got into an accident that caused frame damage in a 2000 audi a6 2.8. The engine is good on it has maybe 80k miles on it. Can i swap just the engine into a 2001 2.7t? i would still like the turbos ...
2000 Audi A6 2.8 quattro Sedan AWD
-
Maintenance & Repair
we just cant get the rotor to loosen enough to get it off.
2006 Audi A6
-
Maintenance & Repair
i broke timing tenschiner bolt how do i remove timing gear on crankshaft bolt ??
1998 Audi A6 2.8 quattro Sedan AWD
-
Maintenance & Repair
I just purchased a used 1997 Audi A6 Quattro and the radio is in safe mode. What are the steps I removing the mode?
1997 Audi A6 2.8 Sedan FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.