The "Car Lost Power While Running" description does not match your description of, "Won't Start After I changed Plugs". Key won't come out of the ignition is a different issue, wiggle the steering wheel to line the locking cogs and make sure it is in the Off position instead of the ACC position. Need more clarity to assist you.
I changed plugs car was running n now car will not start key wont come out ignition n saying to much fuel is causing it not 2 start
1999 Chrysler Sebring JXi Convertible FWD
-
Maintenance & Repair
It seems after car gets to a certain temperature it runs very rough. I changed the valve cover gaskets after finding oil in the spark plug tubes. Now it is running worse. How to you diagnose a sens...
1998 Chrysler Sebring LXi Coupe FWD
-
Maintenance & Repair
I started my 2003 Chrysler it started fine went inside to get ready came out and hoped in when I went to take off it was puttering and losing acceleration then it worked for a moment and another s...
2003 Chrysler Sebring LXi Sedan FWD
-
Maintenance & Repair
While I'm driving the keys fall out of the ignition. Anyone have this happen and what I need to do to fix this.
2002 Chrysler Sebring
-
Maintenance & Repair
My car is running hot no leakage or anything it doesn’t run all the way hot but it gets hot enough that the water in the whit box where the coolant goes boils out of it.
2001 Chrysler Sebring LX Sedan FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.