reverend1735 answered 10 years ago
Look at the label under the hood. It should say on there... or... If you buy platinum plugs, they come gapped already. Trying to measure the gap with the old gauge wire method runs the risk of scratching off the platinum plating.
I was wanting to know the proper gapping on a spark plug for a 2000 Chrysler sebring lxi
2000 Chrysler Sebring LXi Coupe FWD
-
Maintenance & Repair
What are things I should look for or worry about when purchasing an 05 Chrysler Sebring 4D?
2005 Chrysler Sebring Touring Sedan FWD
-
Maintenance & Repair
I have a 06 chrysler sebring i started with replacing the radiator then a thermostat then a coolant bleeder valve and now when you try to drive it if you turn the heat off it over heats. Spent a da...
2006 Chrysler Sebring Touring Sedan FWD
-
Maintenance & Repair
Ran over a pretty big rock and heard it hit under my 2003 Chrysler Sebring. Then after I heard the hit of the rock my car quit running totally after about 100 yards and wouldn't start back up . Wh...
2003 Chrysler Sebring LX Coupe FWD
-
Maintenance & Repair
Is there anyway to tell if your valves are OK after your timing belt breaks in a 2.4 liter motor dohc 2001 Chrysler Sebring?
2001 Chrysler Sebring LX Sedan FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.