water was leaking from the port hole. I replaced the water pump. Now water is running from the rear of the engine. what shall I do%3E
Asked by masterautorepair Aug 03, 2013 at 10:09 PM about the 2002 Chrysler Sebring LXi Sedan FWD
Question type: Maintenance & Repair
I replaced the water pump. now water is running from rear of engine
4 Answers
Fordtudor37 answered 10 years ago
Could you please clarify where is the water leaking form the back of the engine ? Look at the back of the manifold and if its not there, look on each side of the engine block, to see if a freeze plug is rotted or backing out.
migration_tommcmanis... answered 10 years ago
2.5, ? If you removed the tbelt to get to it and removed it as a unit there is a main coolant pipe under the manifold from pump to upper radiator output hose on the back of the pump on the pipe is a o ring if you didnt grease the o ring its torn and will need come apart to repair problem. If its a 2.7 liter consult a repair manual. As i havent ripped into one yet.
migration_tommcmanis... answered 10 years ago
3.0 mitsu engine shares same configuration and same thing to repair it
