timing

timing 2 Answers

I set the timing opposite direction on my Chrysler 300m 3.5L cranked it had knocking sound tuned it off now won't start

I need help setting the timing, adjusting the rocker arms and setting them they are hydraulic and I have a question about what the metal shavings could be from that where by the rockers the right head 5 Answers

Reason for work: knocking on the right side top end facing the motor. what I did: I took off the valve cover on the right side and noticed there was some big thin metal shavings by the rocker arms...

2002 Chrysler 300M special,replaced timing belt,heads,crank and cam sensors. it still starts hard periodicaly and say crank to cam corrolation incorrect. then the next time it starts fine. 14 Answers

the timing belt broke I have replaced the heads with ones from junk yard. All timing marks are on the money. It will start once in a while with no issues and no codes as soon as you shut it off and ...

Can overheating cause a timing issue? I have a 99 chrysler 300 m?Update : I was driving on the freeway and the temp gauge hit the red so I pulled over. I let it cool and put as much water as I could considering there is a bleeder screw at the top of the block and I had no tools. I started it and drove a mile or two and the gauge hit the red again so I pulled over again. I let it cool again and put a little more water. When i tried to start it it back fired and would not start to I had it towed home.Update 2: I drained the water and cleaned the spark plugs and tried to start it but it backfired again and then just kept turning by the starter. If it was the head gasket it should start right? 1 Answer

Overheating, blown head gasket, timing

Does the 2003 chrysler 300m have timing chain or timing belt - when should it be replaced? 1 Answer