Make sure the pcv (valve) is good, I'd change it along with any breathers, motor needs to breath, you can go farther and see if they make replacement rubber grommets' to replace, also look and see if valve cover is leaking also, replace gasket if necessary. Look at the hoses that run to the valve cover, make sure they are in good shape.
2010 Chrysler PT Cruiser Wagon FWD
-
Maintenance & Repair
My 2003 PT Cruiser Turbo won't pass inspection because the catalyst & evap sensors "not ready"... I've driven it for over 400 miles!! How can I remedy this?
2003 Chrysler PT Cruiser GT Wagon FWD
-
Maintenance & Repair
Hey, I have a quick-ish question about a 2001 pt cruiser and it's oil light. The Light on the dash comes on after about 10 minutes of low impact, normal everyday driving, that is a minor issue, the ma...
2001 Chrysler PT Cruiser Wagon FWD
-
Maintenance & Repair
The oil light for my 2004 PT Cruiser keeps coming on. Now a little back story. Had the car about 11 years, it has 138,000 miles. Non-turbo. Standard PT Cruiser, no bells or whistles. This started hap...
2004 Chrysler PT Cruiser
-
Maintenance & Repair
02 PT often will crank but not start, if doors are locked then unlocked it will start, the other day it shut down while driving down the road, we did the lock unlock on the doors and it started up So...
2002 Chrysler PT Cruiser Limited Wagon FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.