Yes, although the electronics and wiring might be different. Make sure you get the ECM along with it and expect a few minor differences which may turn into major headaches. In other words do your homework carefully first, or find an engine from the same year car.
I have a 2006 2.2 ecotec engine . Would it fit and plug perfectly into a 2010 2.2 but ecotec shell
2010 Chevrolet Cobalt LS Sedan FWD
-
Maintenance & Repair
Please HELP!! Hard start, oil leak, ticking/knocking noise rt passenger side, starts to get hot sitting in traffic but cools down when moving! cam sensor replaced, oil pan replaced, TBI cleaned, n...
2010 Chevrolet Cobalt LS Sedan FWD
-
Maintenance & Repair
I have a 07 Cobalt with a 2.2 I pulled the motor out and put in a 06 2.2 and now it only cranks dose not start I did notice that the 06 dose not have a can seansor but the 07 dose is there somethin...
2007 Chevrolet Cobalt
-
Maintenance & Repair
My engine locked up and I need to replace it. I have located a 2010 2.2 l engine. Will it inter change?
2006 Chevrolet Cobalt LS Coupe FWD
-
Maintenance & Repair
I have a 2008 chevy cobalt with a 2.2l non VVT ecotec and want to replace it with a 2.2l VVT ecotec and need to know what all has to be changed/added to make the VVT motor work.
2008 Chevrolet Cobalt LT Sedan FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.