I have a 2009 ford f150 and the heat does not work. Ac works fine but cant get heat to come on. Everything in engine seems fine and changed actuator motor but new one still doesnt move when I try to
Move temp to heat. Anyone have any .
Ideas
Asked by jimdevereaux Dec 15, 2014 at 07:45 PM about the 2009 Ford F-150 XL
Question type: Maintenance & Repair
Move temp to heat. Anyone have any .
Ideas
The problem could be at the temperature select switch, if you have a digital volt ohm meter, check for voltage at the switch and for continuity between the switch and the connecter at the actuator. You could also check the movement of the blend door by hand, just to make sure it isn't stuck.
Move temp to heat. Anyone have any . Ideas
2009 Ford F-150 XL
-
Maintenance & Repair
my truck just makes a loud continuouse clicking noise when I try to start it up. but the lights and things still work fine when not started up yet. what could be the problem?
2010 Ford F-150 XL
-
Maintenance & Repair
worked fine one day and would not go down the next. Any thoughts would be greatly appreciated.
2008 Ford F-150 Lariat SuperCab SB
-
Maintenance & Repair
The temperature of the heat and air seem to be just fine. The dial is number 1 to 4, but nothing but 4 seems to be working. How do I figure out/fix what's wrong.
2011 Ford F-150 FX2 SuperCab
-
Maintenance & Repair
My 2004 ford f150 will not start, nothing when turning the key, but if I climb underneath and put a screwdriver across the terminals on the starter it spins but does not engage, just the high speed sp...
2004 Ford F-150 FX4 SuperCrew 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.