Blinker issue after radio installation.

Asked by jdawg514 Apr 22, 2015 at 08:52 PM about the 2008 Chevrolet Silverado 2500HD 2LT Extended Cab 4WD

Question type: Maintenance & Repair

I replaced the factory stereo in my 2008 Chevy Silverado 2500 with a Kenwood system. Once finished, everything is fine except that my right front signal bulbs and the right mirror signal are not working. The rear is working normally though. Any thoughts? I have checked front bulbs and they are fine.

1 Answer
35

MikeBur answered 9 years ago

Unsure of this exact vehicle, though if you're not using an OEM conversion wiring harness then you may have either blown a fuse, or hooked into another "permanently on" wire which may be drawing power on the low current side of the right flasher relay. Easy way to confirm: 1) check the fuse box, 2) swap over flasher relays (left/right), etc. 3) Remove this "always on" connection from radio side and see if the flashers work again.

Mark helpful

Your Answer:

Related Questions

  • Blinker issue after radio installation. 1 Answer

    I replaced the factory stereo in my 2008 Chevy Silverado 2500 with a Kenwood system. Once finished, everything is fine except that my right front signal bulbs and the right mirror signal are not worki...

    2008 Chevrolet Silverado 2500HD 2LT Extended Cab 4WD

    -

    Maintenance & Repair

  • 2006 LBZ Duramax Electrical Issue 1 Answer

    My trans temp, oil pressure, battery, coolant temp, fuel gauge will turn on but return to zero after start up, abs light is on, battery light is on, air bag light on, gear selector won’t indicate w...

    2006 Chevrolet Silverado 2500HD Crew Cab 4WD

    -

    Maintenance & Repair

  • Anti theft radio 2 Answers

    If I took my oem radio hub and then put it back in and tripped the anti theft on the radio can I put in a aftermarket one like a pioneer and get it to work?

    2003 Chevrolet Silverado 2500HD 4 Dr LS 4WD Extended Cab LB HD

    -

    Maintenance & Repair

  • Get thud sound after applying brake 4 Answers

    After applying brake and coming to a stop, get a thud sound like something is loose. Same sound occurs when brake is released. Had new rear rotors and brake pads installed along with new shocks. So...

    Chevrolet Silverado 2500HD

    -

    Maintenance & Repair

  • Why does clock go to 12:00 after starting truck? 1 Answer

    Besides the gauges activating a minute after starting, the clock goes to 12:00. Had batteries load tested, came out good. Thinking of getting new batteries. Have checked all connections, solid.

    2003 Chevrolet Silverado 2500HD 4 Dr LT 4WD Crew Cab LB HD

    -

    Maintenance & Repair

Shortcuts

Search Chevrolet Silverado 2500HD Questions

CarGurus Experts

  • #1
    GuruXPQGJ
    Reputation
    1,430
  • #2
    Reelin68
    Reputation
    1,190
  • #3
    Steven Loeffler
    Reputation
    1,150
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used GMC Sierra 2500HD
32 Great Deals out of 2,120 listings starting at $8,490
Used Chevrolet Silverado 1500
170 Great Deals out of 7,410 listings starting at $6,995
Used Ford F-250 Super Duty
22 Great Deals out of 749 listings starting at $3,990
Used Chevrolet Silverado 3500HD
25 Great Deals out of 942 listings starting at $13,999
Used Dodge RAM 2500
29 listings starting at $7,900
Used GMC Sierra 1500
136 Great Deals out of 7,824 listings starting at $5,500
Used Ford F-150
319 Great Deals out of 13,568 listings starting at $3,888
Used Toyota Tundra
23 Great Deals out of 927 listings starting at $10,698
Used GMC Sierra 3500HD
31 Great Deals out of 1,334 listings starting at $19,995
Used Ford F-350 Super Duty
45 Great Deals out of 1,460 listings starting at $6,777

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.