2008 Mountaineer Anti-Lock Brake System and Stability Control System ligth is on

Asked by wel1335 Feb 12, 2015 at 05:00 PM about the 2008 Mercury Mountaineer V8 Premier AWD

Question type: Maintenance & Repair

My Mountaineer Anti-Lock Brake System and Stability Control System ligth is on when start moving

500

Shawn answered 9 years ago

bad bearings in spindles

Mark helpful

Your Answer:

2008 Mountaineer Anti-Lock Brake System and Stability Control System ligth is on 1 Answer

My Mountaineer Anti-Lock Brake System and Stability Control System ligth is on when start moving

2008 Mercury Mountaineer V8 Premier AWD

-

Maintenance & Repair
Mountaineer 2008 Audio System 1 Answer

For no reason the audio system pops on and says "say navigation,phone, media, tutorial, help" If you do not say anything it then says "sorry did not hear you. Please say (the same list of choices)...

2008 Mercury Mountaineer AWD

-

Maintenance & Repair
I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. The digital display says that there is a "DOOR AJAR". I have checked all the doors as bet I can and they appear closed. BUT the interior lights remain on and the alarm will not set because off the ajar message. Am I missing something? Is the computer having a brain cramp.? I can get the alarm to set if I manually shut off the interior/dash lights too off. then it will work but no interior lights on the dash. This is driving me nuts. Can uou help?Thanks,John 12 Answers

I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. T...

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
Renewed complete exhaust system from manifold back on my 1998 mercury mountaineer. Now there is a P0420 code coming up. Anyone have any ideas ? Thanks 2 Answers

Had all catalytic converters, sensors and pipes replaced by mechanic. Had a misfire code but took care of that. Now have a P0420 cade (catalytic converter efficiency below standard bank 1) . Mechanic ...

1998 Mercury Mountaineer AWD

-

Maintenance & Repair
2008 mercury mountaineer 4.6L 2wd won’t start 2 Answers

I have a 2008 Mercury Mountaineer that i changed the starter, battery, starter rela on and all i get is a rapid clicking. Please help.

2008 Mercury Mountaineer V8 Premier AWD

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.