Bender0013 answered 8 years ago
Have someone pump brakes about 5times then hold brakes on and you lossen to bleader valve on the caliper.
1500 Silervado 08'. Push the brake pedal and will build pressure. Once you release. It goes back to the floor. Bled my brakes with power off.
2008 Chevrolet Silverado 1500 1LT 4WD
-
Maintenance & Repair
I replace the brake calipers and the master cylinder on my 2005 Chevy Silverado 1500 5.3 liter and still cannot get brake pedal back I've bled the system there's times what else could it be
2005 Chevrolet Silverado 1500 Extended Cab RWD
-
Maintenance & Repair
I have to press down on the latch in order for the dome light to come on and for the key in the ignition indicator sound to come on as well. It only happens sometimes but is now occurring more than i ...
2006 Chevrolet Silverado 1500 LS 4WD
-
Maintenance & Repair
I have replaced wheel bearings, rotors, calipers, brake pads, master cylinder, booster and still have the brakes dragging and sticking in the front. What else could cause this?
2005 Chevrolet Silverado 1500
-
Maintenance & Repair
Replaced pads, rotors, calipers and bled the brakes. Felt strong while bleeding but as soon as we started the truck the pedal went to the floor. The brakes did not work at all. They keep going to th...
2004 Chevrolet Silverado 1500
-
Maintenance & Repair
CarGurus has 7,903 nationwide Silverado 1500 listings starting at $3,000.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.