Windshield washer not working. Indicator light is on.
Asked by smuvjz Feb 02, 2013 at 06:53 PM about the 2008 Chrysler 300 LX RWD
Question type: Maintenance & Repair
The windshield washers stopped working. Indicator light comes on after starting engine within 30-40
seconds. the wipers themselves work, but not fluids. And yes, the reservoir is full.
6 Answers
migration_judge_roy answered 11 years ago
take a pin from your sewing kit and stab the exit of each exit of each valve. This may not solve your problem, but it will look keen.
migration_judge_roy answered 11 years ago
There is a cheapo rubber/plastic hose connecting bottom of the reservoir (where the pump resides) to the tee splitter for both exits. Make sure that it is attatched.
migration_judge_roy answered 11 years ago
I'm suspicious of the condition of your charging system if the motor is slo on the go, 13.5 volts is the normal battery voltage. 2008 is too new for this to be askew.
What does the indicator light indicate?
migration_judge_roy answered 11 years ago
Good question. Couldn't possibly be equipped with a 'fill the washer fluid now" light.
Yes it does have a fill washer fluid indicator light. MY 300 has the same problem. Too cold here to troubleshoot, but will get back to you once I find the problem.
