i paid to have all the coil packs and plugs replaced on my 2007 dodge ram 1500 hemi, how can I tell if they replaced all the parts, the far back coil pack under the master cylinder has a light blue paint dot on top of it adn none of the others have this? could this be a factory mark and they changed the plugs and coil packs on just 7 cylinders/

i paid to have all the coil packs and plugs replaced on my 2007 dodge ram 1500 hemi, how can I tell if they replaced all the parts, the far back coil pack under the master cylinder has a light blue paint dot on top of it adn none of the others have this? could this be a factory mark and they changed the plugs and coil packs on just 7 cylinders/ 2 Answers

I have a 2001 Dodge Ram 1500. The turn signals work for a short period of time then they freeze. The signals are light on the dash, but aren't blinking. I have the problem when turning right, left, and when the hazard lights are on. I have replaced the fuse. What could the problem be? 3 Answers

Pickup has had the fuses replaced twice in the past two years. I can't seem to locate the problem and don't have the money for someone to look at it. Your advice would be very appreciated.

I have a 2007 Dodge Ram 1500 SLT with the 4.7. The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with the engine knocking. Is it possible that the 1/4" difference in length caused the pistons to strike the longer, incorrect plugs hence, that caused the knock? The shop admitted to me that the wrong plugs had been ordered. When asked if it was possible that they may have installed the incorrect ones, they told me that the thread size wasn't the same. Well, truth be told, it is the same size thread. Thanks for any input! 2 Answers

The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with th...

i have a 2002 dodge 1500, 4.7. It will crank but not start, replaced the CAMshaft and crankshaft senors, replace all plugs, fuel tested ok, we can here the fuel pump engage, we have spark and that last thing we just did was changed all the timing chains (it was out of timing) but the truck still will not start. Help on what could be next? Thanks 42 Answers

2002 dodge 1500 4.7 cranks will not start.

Have 2002 Dodge Ram 1500 and it has miss firing on four cyclones #1 2 3 4 I replaced the plugs and the engine light came back on saying miss firing again what next please help 1 Answer

What causes the miss fire, what is the next step?