HI, I have 2002 BMW X5 4.4, and its throwing a P0011 code which is A Camshaft Position Timing Over-Advanced or system performance Bank 1 and bank 2.

Asked by Zachary Feb 16, 2017 at 08:48 PM about the 2002 BMW X5 4.4i AWD

Question type: Maintenance & Repair

It idles a little weird kinda wobbles a little, but sounds good and drive good
except when going 20-40 mph it shakes and then kicks out of it. The engine
was just put in, could the timing be off? Should i just replace the Camshaft
Position Sensors? Or am i screwed and its the Timing guide rail/timing chain
going? Help me please!!

44,815

jamnblues answered 7 years ago

You just sail right by "the engine was just put in" lol so..........WHO put the engine in? shouldn't you be asking THEM-

1 people found this helpful.

Mark helpful

Zachary answered 7 years ago

The guy that put it in said it should come out of it the more i drive it but i find it hard to believe with that code showing

Mark helpful

Your Answer:

HI, I have 2002 BMW X5 4.4, and its throwing a P0011 code which is A Camshaft Position Timing Over-Advanced or system performance Bank 1 and bank 2. 2 Answers

It idles a little weird kinda wobbles a little, but sounds good and drive good except when going 20-40 mph it shakes and then kicks out of it. The engine was just put in, could the timing be off? Sh...

2002 BMW X5 4.4i AWD

-

Maintenance & Repair
I have a BMW X5 2012 and my oil leak is coming out of the Oil Sensor 1 Answer

I am not able to buy a NEW oil sensor so I will use some type of RTV sealant on the Gasket. Will it work!

2012 BMW X5 xDrive35d AWD

-

Maintenance & Repair
Hi, I have a 2010 X5 diesel and the driver mirror stopped working. 2 Answers

The passenger side mirror works, adjusts and can tilt in, by the switch on the driver door. The drivers mirror does nothing. Im guessing a wire clip came off?? Anyone have any ideas and any advice...

2010 BMW X5 xDrive35d AWD

-

Maintenance & Repair
i have a 2005 bmw x5 3.0, in the morning i drove about 2 miles. after a little while I started the car but wasnt even a cranking sound, then i jump start it and drove about a mile to get home. i stop the car, in morning i try to start again, in the first turn nothing happened, tryed again and it started, but i drove like about 8 mils and it was dead. while i was driving the battery sign was blinking. Then i jump start again and drove for another 4 mils to a parts store. They checked the battery and said it is fine, but the machine says 9.8 - 10 low but good, then we try to start it but it was in starting, so he jump start it agin and i drove about 15 miles, then i shut off, and restart few time, without any problem, but after a little while the alarm go of by itself. According to the Mechanic, it's the alternator or the starter. Can you please help me with it, which one you think it is alternator, starter or battery?? 4 Answers

i have a 2005 bmw x5 3.0, in the morning i drove about 2 miles. after a little while I started the car but wasnt even a cranking sound, then i jump start it and drove about a mile to get home. i sto...

2005 BMW X5 3.0i AWD

-

Maintenance & Repair
Is it necessary to register a new battery on a 2002 v5 4.4 v8 2 Answers

Do i need to register battery replacement on x5 2002 bmw 4.4

2002 BMW X5 4.4i AWD

-

Maintenance & Repair

Used BMW 5 Series

28 Great Deals out of 292 listings starting at $5,299

Used BMW 3 Series

58 Great Deals out of 1,178 listings starting at $2,500

Used Porsche Cayenne

15 Great Deals out of 278 listings starting at $7,995

Used Jeep Grand Cherokee

130 Great Deals out of 3,647 listings starting at $5,555

Used Acura MDX

51 Great Deals out of 892 listings starting at $3,999

Used BMW 7 Series

10 Great Deals out of 135 listings starting at $8,499

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

HI, I have 2002 BMW X5 4.4, and its throwing a P0011 code which is A Camshaft Position Timing Over-Advanced or system performance Bank 1 and bank 2.

2 Answers

Your Answer:

Shortcuts

Search BMW X5 Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

HI, I have 2002 BMW X5 4.4, and its throwing a P0011 code which is A Camshaft Position Timing Over-Advanced or system performance Bank 1 and bank 2.

2 Answers

Your Answer:

Related Questions