My gas pedal is very hard to push and sometimes I have to stomp on it to get it to move back and forth but its still hard as hell to push. Anybody know the reason(s) and possible solutions ??

My gas pedal is very hard to push and sometimes I have to stomp on it to get it to move back and forth but its still hard as hell to push. Anybody know the reason(s) and possible solutions ?? 2 Answers

I need to know where my Camshaft centering sensor is located on my pickup, and how to replace it, can you help? It turns but does not start. 2 Answers

I've tried New fuel filter and new plugs but it still is not starting so I'm thinking the source of the problem is the Camshaft Centering Sensor, but I don't know where to find it on my truck, or how ...

Newb with a Q I have a 1996 chevy 1500 and need to take the bench seat out to work on the floor board. How hard is it and do I need special tools? 3 Answers

V6 engine 2 wheel drive (?) OLD truck Already had replaced radiator, upper oil seals (?) need to do the lower ones sometime the brake line broke this morning so that's coming up really soon. Need ...

I need help bad. My truck us a Chevy 1500 1995 and if I drive about 30 miles or so and hit a red light and go to hit the gas. I'll have the peddle to the floor and it will start off slow then out of no where kick in and speed up. And if I'm going down the high way and the cruise control is on and I'm going up a hill it will do that. Throttle slow then kick in and speed up. Also when I go to slow down pulling in some where the truck sounds like its about to shut off then comes back to normal. What wrong with it? 11 Answers

Ppl say it is my throttle body or my filter on my fuel pump or its I have no back pressure and my o2 senser is messed up since its straight pipe no cat converter. What is it.

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...