migration_jml12345 answered 14 years ago
look for a square somewhere near that pully for a ratchet or use a socket on the pully
the tensioner pressure is release by using a 3/8" ratchet or strong arm. Make sure you have enough room for when the belt is removed the ratchet can fully return to the open position.
He was mumbling "i cant get the tensioner lifted" how can I help him get this done ???????HELP
1993 Chevrolet C/K 1500 Cheyenne RWD
-
Maintenance & Repair
My 1993 Chevy Cheyenne K 1500 4wd LB ring gears teeth are in pieces due to a lock up in the rear axle. I used the Chevrolet forums vin decoder on their website to diagnose what is the exact gear rat...
1993 Chevrolet C/K 1500 Cheyenne Extended Cab LB 4WD
-
Maintenance & Repair
just changed spark plugs, cap, rotors, and wires. the truck ran fine and started fine just yesterday. Chevy C1500, Motor350 5.7 V8.
1998 Chevrolet C/K 1500 Cheyenne Extended Cab LB RWD
-
Maintenance & Repair
The air sounds like it wants to come out of the defrost but it just wont. The blend door actuator replacement didnt solve the problem. What else could it be?
1993 Chevrolet C/K 1500 Cheyenne Stepside RWD
-
Maintenance & Repair
i have a 95 chevy c1500 v8 200k plus miles. new battery. seems to short out and die, and wont restart. when key is turned on the amp gauge barely moves up. ive tried fumbling with the obvious wir...
1995 Chevrolet C/K 1500 Silverado Stepside RWD
-
Maintenance & Repair
CarGurus has 5 nationwide C/K 1500 listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.